Institute for Research in Technology (IIT)

Highlighted Publications

R. Caro, A. Carnicero, J.R. Jiménez-Octavio, D. Cousineau, "Utilizing jackknife and bootstrap to understand tensile stress to failure of an epoxy resin", Quality Engineering, Vol. 36, nº. 4, pp. 726 - 742, 2024. [Online: December 2023] doi: 10.1080/08982112.2023.2286500
JCR-JIF: 2,200 Q1 (2024); 2,600 Q1 (2025) - SJR: 0,530 Q2 (2024); 0,610 Q2 (2025)
J.M. Asensio-Gil, J.R. Jiménez-Octavio, A. Carnicero, M. Valdano, D. Guzmán, F.J. López-Valdés, "Numerical analysis of injuries of e-scooter riders in frontal impacts against SUVs", Results in Engineering, Vol. 21, pp. 101936, March 2024. [Online: February 2024] doi: 10.1016/j.rineng.2024.101936
JCR-JIF: 7,900 Q1 (2024); 9,400 Q1 (2025) - SJR: 1,171 Q1 (2024); 1,240 Q1 (2025)
A. Sánchez-Bonastre, L.F. S. Merchante, C. González-Bravo, A. Carnicero, "Systematic measuring cortical thickness in tibiae for bio-mechanical analysis", Computers in Biology and Medicine, Vol. 163, pp. 107123, September 2023. [Online: June 2023] doi: 10.1016/j.compbiomed.2023.107123
JCR-JIF: 7,000 Q1 (2023); 6,300 Q1 (2024) - SJR: 1,481 Q1 (2023); 1,375 Q1 (2025)
M. Elkhlaidy, A. Carnicero, R. Perera, "Influence of flange geometric configuration and bolt stress on joint integrity during assembly using FEA", International Journal of Pressure Vessels and Piping, Vol. 202, pp. 104912, April 2023. [Online: February 2023] doi: 10.1016/j.ijpvp.2023.104912
JCR-JIF: 3,000 Q1 (2023); 3,900 Q1 (2025) - SJR: 0,669 Q2 (2023); 0,743 Q1 (2025)
I. Granell, A. Ramos, A. Carnicero, "A geometry-based welding distortion prediction tool", Materials, Vol. 14, nº. 17, pp. 4789, September 2021. [Online: August 2021] doi: 10.3390/ma14174789
JCR-JIF: 3,748 Q1 (2021); 3,700 Q2 (2025) - SJR: 0,604 Q2 (2021); 0,617 Q2 (2025)

show 5 highlighted publications

Journal Publications

R. Caro, A. Carnicero, J.R. Jiménez-Octavio, D. Cousineau, "Utilizing jackknife and bootstrap to understand tensile stress to failure of an epoxy resin", Quality Engineering, Vol. 36, nº. 4, pp. 726 - 742, 2024. [Online: December 2023] doi: 10.1080/08982112.2023.2286500
JCR-JIF: 2,200 Q1 (2024); 2,600 Q1 (2025) - SJR: 0,530 Q2 (2024); 0,610 Q2 (2025)
J.M. Asensio-Gil, J.R. Jiménez-Octavio, A. Carnicero, M. Valdano, D. Guzmán, F.J. López-Valdés, "Numerical analysis of injuries of e-scooter riders in frontal impacts against SUVs", Results in Engineering, Vol. 21, pp. 101936, March 2024. [Online: February 2024] doi: 10.1016/j.rineng.2024.101936
JCR-JIF: 7,900 Q1 (2024); 9,400 Q1 (2025) - SJR: 1,171 Q1 (2024); 1,240 Q1 (2025)
A. Sánchez-Bonastre, L.F. S. Merchante, C. González-Bravo, A. Carnicero, "Systematic measuring cortical thickness in tibiae for bio-mechanical analysis", Computers in Biology and Medicine, Vol. 163, pp. 107123, September 2023. [Online: June 2023] doi: 10.1016/j.compbiomed.2023.107123
JCR-JIF: 7,000 Q1 (2023); 6,300 Q1 (2024) - SJR: 1,481 Q1 (2023); 1,375 Q1 (2025)
M. Elkhlaidy, A. Carnicero, R. Perera, "Influence of flange geometric configuration and bolt stress on joint integrity during assembly using FEA", International Journal of Pressure Vessels and Piping, Vol. 202, pp. 104912, April 2023. [Online: February 2023] doi: 10.1016/j.ijpvp.2023.104912
JCR-JIF: 3,000 Q1 (2023); 3,900 Q1 (2025) - SJR: 0,669 Q2 (2023); 0,743 Q1 (2025)
G. Castrillo, A. Carnicero, R. Perera, "Submodelling approach to screw-to-bone interaction in additively manufactured subperiosteal implant structures", International Journal for Numerical Methods in Biomedical Engineering, Vol. 39, nº. 2, pp. e3672, February 2023. [Online: December 2022] doi: 10.1002/cnm.3672
JCR-JIF: 2,200 Q2 (2023); 2,100 Q2 (2025) - SJR: 0,573 Q2 (2023); 0,518 Q2 (2025)
A. Carnicero, A. Peláez, A. Restoy-Lozano, I. Jacquott, R. Perera, "Improvement of an additively manufactured subperiosteal implant structure design by finite elements based topological optimization", Scientific Reports, Vol. 11, pp. 15390, December 2021. [Online: July 2021] doi: 10.1038/s41598-021-94980-1
JCR-JIF: 4,996 Q2 (2021); 4,900 Q1 (2025) - SJR: 1,005 Q1 (2021); 0,893 Q1 (2025)
S. Catalán-Gómez, A. Redondo-Cubero, M. Morales, M. de la Mata, S.I. Molina, F.J. Palomares, A. Carnicero, J.L. Pau, L. Vázquez, "Modification of the mechanical properties of core-shell liquid gallium nanoparticles by thermal oxidation at low temperature", Particle and Particle Systems Characterization, Vol. 38, nº. 10, pp. 2100141, October 2021. [Online: August 2021] doi: 10.1002/ppsc.202100141
JCR-JIF: 3,467 Q3 (2021); 2,700 Q3 (2025) - SJR: 0,688 Q2 (2021); 0,584 Q2 (2025)
I. Granell, A. Ramos, A. Carnicero, "A geometry-based welding distortion prediction tool", Materials, Vol. 14, nº. 17, pp. 4789, September 2021. [Online: August 2021] doi: 10.3390/ma14174789
JCR-JIF: 3,748 Q1 (2021); 3,700 Q2 (2025) - SJR: 0,604 Q2 (2021); 0,617 Q2 (2025)
A. Garrido, R. Caro, J.R. Jiménez-Octavio, A. Carnicero, M. Such, "A new approach to fitting the three-parameter Weibull distribution: An application to glass ceramics", Communications in Statistics - Theory and Methods, Vol. 50, nº. 14, pp. 3403 - 3420, July 2021. [Online: December 2019] doi: 10.1080/03610926.2019.1702698
JCR-JIF: 0,863 Q4 (2021); 0,900 Q3 (2025) - SJR: 0,435 Q3 (2021); 0,427 Q3 (2025)
L.F. S. Merchante, A. Carnicero, F.J. López-Valdés, J.R. Jiménez-Octavio, "La movilidad urbana como métrica de la COVID-19", Dyna (Spain), Vol. 96, nº. 4, pp. 368 - 372, July 2021. doi: 10.6036/9897
JCR-JIF: 2,070 Q3 (2021); 0,600 Q4 (2025) - SJR: 0,160 Q4 (2021); 0,153 Q4 (2024)
L.F. S. Merchante, D. Clar, A. Carnicero, F.J. López-Valdés, J.R. Jiménez-Octavio, "Real-time CO2 emissions estimation in Spain and application to the COVID-19 pandemic", Journal of Cleaner Production, Vol. 296, pp. 126425, May 2021. [Online: February 2021] doi: 10.1016/j.jclepro.2021.126425
JCR-JIF: 11,072 Q1 (2021); 10,700 Q1 (2025) - SJR: 1,921 Q1 (2021); 2,019 Q1 (2025)
E. Vélez, A. Carnicero, R. Perera, "Elemental crack advance assessment and verification for its use in LBB analysis", Nuclear Engineering and Design, Vol. 363, pp. 110622, July 2020. [Online: April 2020] doi: 10.1016/j.nucengdes.2020.110622
JCR-JIF: 1,869 Q2 (2020); 2,500 Q1 (2025) - SJR: 1,147 Q1 (2020); 0,741 Q1 (2025)
R. Perera, S. Sandercock, A. Carnicero, "Civil structure condition assessment by a two-stage FE model update based on neural network enhanced power mode shapes and an adaptive roaming damage method", Engineering Structures, Vol. 207, pp. 110234, March 2020. [Online: January 2020] doi: 10.1016/j.engstruct.2020.110234
JCR-JIF: 4,471 Q1 (2020); 7,600 Q1 (2025) - SJR: 1,567 Q1 (2020); 1,922 Q1 (2025)
M. Such, J.R. Jiménez-Octavio, A. Carnicero, C. Sanchez-Rebollo, "Simulación de cargas móviles sobre estructuras mediante un mallado móvil de elementos finitos", Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 31, nº. 4, pp. 212 - 217, December 2015. [Online: November 2014] doi: 10.1016/j.rimni.2014.06.003
JCR-JIF: 0,207 Q4 (2015); 0,700 Q4 (2025) - SJR: 0,176 Q4 (2025)
J.R. Jiménez-Octavio, M. Such, A. Carnicero, C. Sanchez-Rebollo, "Aplicación de un mallado móvil de elementos finitos a la interacción dinámica catenaria-pantógrafo", Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 31, nº. 4, pp. 268 - 274, December 2015. [Online: February 2015] doi: 10.1016/j.rimni.2014.10.003
JCR-JIF: 0,207 Q4 (2015); 0,700 Q4 (2025) - SJR: 0,176 Q4 (2025)
J.R. Jiménez-Octavio, A. Carnicero, C. Sanchez-Rebollo, M. Such, "A moving mesh method to deal with cable structures subjected to moving loads and its application to the catenary-pantograph dynamic interaction", Journal of Sound and Vibration, Vol. 349, pp. 216 - 229, August 2015. [Online: April 2015] doi: 10.1016/j.jsv.2015.03.051
JCR-JIF: 2,107 Q1 (2015); 5,800 Q1 (2025) - SJR: 1,331 Q1 (2025)
C. Sanchez-Rebollo, A. Carnicero, J.R. Jiménez-Octavio, "CANDY statement of methods", Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, Vol. 53, nº. 3, pp. 392 - 401, March 2015. [Online: December 2014] doi: 10.1080/00423114.2014.982135
JCR-JIF: 1,306 Q2 (2015); 4,500 Q1 (2025) - SJR: 1,413 Q1 (2025)
S. Bruni, J. Ambrosio, A. Carnicero, Y. Hyeon Cho, L. Finner, M. Ikeda, S. Young Kwon, J.P Massat, S. Stichel, et al., "The results of the pantograph-catenary interaction benchmark", Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, Vol. 53, nº. 3, pp. 412 - 435, March 2015. [Online: November 2014] doi: 10.1080/00423114.2014.953183
JCR-JIF: 1,306 Q2 (2015); 4,500 Q1 (2025) - SJR: 1,413 Q1 (2025)
F.M. Fernandes, L. Vázquez, E. Ruiz-Hitzky, A. Carnicero, M. Castro, "Elastic properties of natural single nanofibres", RSC Advances, Vol. 2014, nº. 4, pp. 11225 - 11231, 2014. [Online: February 2014] doi: 10.1039/C3RA47452F
JCR-JIF: 3,840 Q2 (2014); 6,100 Q2 (2025) - SJR: Q1 (2014); 0,859 Q1 (2025)
J.R. Jiménez-Octavio, C. Sanchez-Rebollo, A. Carnicero, "The dependance on mechanical design in railway electrification: focusing on the ac perspective", IEEE Electrification Magazine, Vol. 1, nº. 1, pp. 4 - 10, September 2013. doi: 10.1109/MELE.2013.2271416
JCR-JIF: 3,000 Q2 (2024) - SJR: 0,694 Q2 (2025)
C. Sanchez-Rebollo, J.R. Jiménez-Octavio, A. Carnicero, "Active control strategy on a catenary pantograph validated model", Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, Vol. 51, nº. 4, pp. 554 - 569, April 2013. [Online: February 2013] doi: 10.1080/00423114.2013.764455
JCR-JIF: 0,872 Q2 (2013); 4,500 Q1 (2025) - SJR: Q1 (2013); 1,413 Q1 (2025)
A. Carnicero, J.R. Jiménez-Octavio, C. Sanchez-Rebollo, A. Ramos, M. Such, "Influence of track irregularities in the catenary-pantograph dynamic interaction", Journal of Computational and Nonlinear Dynamics, Vol. 7, nº. 4, pp. 41015, October 2012. [Online: July 2012] doi: 10.1115/1.4006735
JCR-JIF: 0,927 Q2 (2012); 2,100 Q3 (2025) - SJR: Q1 (2012); 0,460 Q2 (2025)
A. Carnicero, J.R. Jiménez-Octavio, C. Sanchez-Rebollo, "Simulation of the catenary - pantograph dynamic interaction", Tecnirail Ferrocarril & Empresa, Nº. 102, pp. 26 - 27, June 2012.
M. Such, J.R. Jiménez-Octavio, A. Carnicero, O. López-García, "An approach based on the catenary equation to deal with static analysis of three dimensional cable structures", Engineering Structures, Vol. 31, nº. 9, pp. 2162 - 2170, September 2009. [Online: April 2009] doi: 10.1016/j.engstruct.2009.03.018
JCR-JIF: 1,256 (2009); 7,600 Q1 (2025) - SJR: 1,922 Q1 (2025)
J. Munilla, M. Castro, A. Carnicero, "Surface effects in atomistic mechanical simulations of Al nanocrystals", Physical Review B, Vol. 80, nº. 2, pp. 24109.1 - 24109.9, July 2009. [Online: July 2009] doi: 10.1103/PhysRevB.80.024109
JCR-JIF: 3,900 Q2 (2025) - SJR: 1,235 Q1 (2025)
M. Such, J.R. Jiménez-Octavio, A. Carnicero, O. López-García, "Modelado de estructuras de cables", Anales de Mecánica y Electricidad, Vol. LXXXV, nº. IV, pp. 22 - 27, July 2008.
O. López-García, A. Carnicero, V. Torres, J.R. Jiménez-Octavio, "The influence of cable slackening on the stiffness computation of railway overheads", International Journal of Mechanical Sciences, Vol. 50, nº. 7, pp. 1213 - 1223, July 2008. [Online: April 2008] doi: 10.1016/j.ijmecsci.2008.04.001
JCR-JIF: 1,077 (2008); 11,400 Q1 (2025) - SJR: 2,101 Q1 (2025)
J.R. Jiménez-Octavio, O. López-García, E. Pilo, A. Carnicero, "Coupled electromechanical optimization of power transmission lines", CMES: Computer Modeling in Engineering & Sciences, Vol. 25, nº. 2, pp. 81 - 97, February 2008. doi: 10.3970/cmes.2008.025.081
JCR-JIF: 4,785 (2008); 2,900 Q1 (2025) - SJR: 0,527 Q2 (2025)
O. López-García, A. Carnicero, J.L. Maroño, "Influence of stiffness and contact modelling on catenary–pantograph system dynamics", Journal of Sound and Vibration, Vol. 299, nº. 4-5, pp. 806 - 821, February 2007. [Online: October 2006] doi: 10.1016/j.jsv.2006.07.018
JCR-JIF: 1,024 (2007); 5,800 Q1 (2025) - SJR: 1,331 Q1 (2025)
A. Carnicero, J.R. Jiménez-Octavio, O. López-García, "Técnicas computacionales aplicadas al estudio del sistema de captación de energía en sistemas ferroviarios", Anales de Mecánica y Electricidad, Vol. LXXXIV, nº. I, pp. 40 - 47, January 2007.
J.L. Maroño, A. Carnicero, O. López-García, "Modelo simplificado para la simulación de la interacción dinámica catenaria - pantógrafo", Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 23, nº. 1, pp. 15 - 33, January 2007.
JCR-JIF: 0,700 Q4 (2025) - SJR: 0,176 Q4 (2025)
O. López-García, A. Carnicero, V. Torres, "Computation of the initial equilibrium of railway overheads based on the catenary equation", Engineering Structures, Vol. 28, nº. 10, pp. 1387 - 1394, August 2006. [Online: March 2006] doi: 10.1016/j.engstruct.2006.01.007
JCR-JIF: 0,813 (2006); 7,600 Q1 (2025) - SJR: 1,922 Q1 (2025)
A. Carnicero, O. López-García, J.L. Maroño, "Modelo simplificado de la interacción dinámica catenaria-pantógrafo", Anales de Mecánica y Electricidad, Vol. LXXXIII, nº. III, pp. 30 - 35, May 2006.
O. López-García, A. Carnicero, R. Ruiz, J.A. Talavera, C. Mateo, "Development of a current sensor based on active materials for high-voltage transmission systems", Smart Materials and Structures, Vol. 15, nº. 2, pp. 563 - 570, April 2006. [Online: February 2006] doi: 10.1088/0964-1726/15/2/039
JCR-JIF: 1,510 (2006); 3,800 Q2 (2025) - SJR: 0,673 Q2 (2025)
V. Torres, A. Carnicero, O. López-García, "Un modelo para el cálculo de catenarias ferroviarias", Anales de Mecánica y Electricidad, Vol. LXXXI, nº. II, pp. 50 - 54, March 2004.
O. López-García, A. Carnicero, R. Ruiz, "Materiales inteligentes (II): aplicaciones tecnológicas", Anales de Mecánica y Electricidad, Vol. LXXXI, nº. I, pp. 16 - 21, January 2004.
O. López-García, A. Carnicero, R. Ruiz, "Materiales inteligentes I/II: introducción a los materiales del siglo XXI", Anales de Mecánica y Electricidad, Vol. LXXX, nº. VI, pp. 40 - 46, November 2003.
J.L. Galindo, A. Carnicero, "Optimización mediante algoritmos genéticos: Aplicación al diseño de celosías", Anales de Mecánica y Electricidad, Vol. LXXX, nº. V, pp. 40 - 50, September 2003.
A. Cantizano, A. Carnicero, G. Zavarise, "Numerical simulation of wear-mechanism maps", Computational Materials Science, Vol. 25, nº. 1-2, pp. 54 - 60, September 2002. [Online: May 2002] doi: 10.1016/S0927-0256(02)00249-5
JCR-JIF: 0,856 (2002); 3,700 Q2 (2025) - SJR: 0,720 Q1 (2025)
A. Carnicero, R. Perera, E. Alarcón, "Modelo simplificado de daño por fatiga para hormigón armado", Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 17, nº. 1, pp. 83 - 98, January 2001.
JCR-JIF: 0,700 Q4 (2025) - SJR: 0,176 Q4 (2025)
R. Perera, A. Carnicero, E. Alarcón, "A fatigue damage model for seismic response of RC structures", Computers & Structures, Vol. 78, nº. 1-3, pp. 293 - 302, November 2000. [Online: August 2000] doi: 10.1016/S0045-7949(00)00071-7
JCR-JIF: 5,600 Q1 (2025) - SJR: 1,243 Q1 (2025)
A. Carnicero, R. Perera, E. Alarcón, "Simplified model of low cycle fatigue for RC frames discussion", Journal of Structural Engineering, Vol. 125, nº. 10, pp. 1200 - 1202, October 1999. doi: 10.1061/(ASCE)0733-9445(1999)125:10(1200)
JCR-JIF: 3,800 Q1 (2025) - SJR: 1,206 Q1 (2025)

show 42 journal publications

Projects

show 41 projects

Ph.D. Thesis

show 7 Ph.D. Thesis

Conference Papers

show 28 conference papers

Books and Book Chapters

show 3 books and book chapters

Invited Conferences and Seminars

Round table "The role of Engineering in post COVID-19 society". Universidad Pontificia Comillas. Madrid (Spain). Jun 2020.
Presentation "Optimización del sistema de alimentación y captación de energía: catenaria-pantógrafo y subestaciones" EnerTrain2010, Sistemas y nuevas tecnologías en ferrocarril para el ahorro energético. IIR-España. Madrid (Spain). Oct 2010.
Conference "Modelos de simulación dinámica catenaria-pantógrafo" International Rail Forum 2010. Valencia (Spain). May 2010.
Conference "Simulation models of catenary-pantograph dynamic interaction. Validation and applications" Workshop on Power transmission in High Speed Railways Systems. Amiens (France). Dec 2009.

show 4 invited conferences and seminars

Organization of Scientific Meetings

Organization of "Future Urban Mobility Challenge". Universidad Pontificia Comillas. Madrid (Spain). Feb 2022.
Organization of "Future Urban Mobility Challenge 2". Universidad Pontificia Comillas; y Ferrovial. Madrid (Spain). Feb 2021.

show 2 organization of scientific meetings

Working Papers

P. Rodríguez, J.C. Polo, L.F. Alvarado, A. Carnicero, J.R. Jiménez-Octavio, C. Sanchez-Rebollo, "Compact lines with pivoted insulated cross-arms. General stability design criteria", July 2016. IIT-16-109A.

show 1 working papers

External Training Courses

7th Advanced course on injury biomechanics. Financed by Inscripciones participantes. Jan/2019-Mar/2019

show 1 external training courses

External Relevant Positions

Member of Jury of the Ist Edition of the National Awards for Mobility Empresas por la Movilidad Sostenible; Ministerio de Transportes, Movilidad y Agenda Urbana; Fundación CONAMA; y Real Academia de Ingeniería. Madrid (Spain). Apr 2021.
Evaluator Agencia Nacional de Evaluación y Prospectiva (ANEP), Ministerio de Ciencia e Innovación. Madrid (Spain). Jan 2014.

show 2 external relevant positions

Fellowships and Awards

Director of prizewinning work in "2º Premio Talgo al mejor Proyecto Fin de Carrera 2010-11. Director del PFC «Estudio del comportamiento dinámico de catenaria de alta velocidad»". Universidad Pontificia Comillas. Madrid (Spain). Mar 2012.
Fellowship "Beca de formación CISM Advanced School - Computational Fluid-Structure Interaction". International Centre for Mechanical Sciences (CISM). Udine (Italy). Sep 2010.
«Simulación, cálculo y optimización ferroviaria» "X Premio Talgo a la Innovación Tecnológica". Patentes Talgo S.L. Madrid (Spain). May 2010.
Director of prizewinning work in "Honorary Distinction to the best Doctoral Thesis on Engineering «Análisis dinámico y optimización de catenarias para alta velocidad» by Jesús Jiménez ". Universidad Pontificia Comillas. Madrid (Spain). Jan 2010.

show 4 fellowships and awards

Other Activities

Doctoral Defense Committee of "Ospina Mateus, H. «El comportamiento, los conflictos de tráfico y los factores asociados con la accidentalidad de los motociclistas en las intersecciones de las vías de Cartagena»". Pontificia Universidad Javeriana - PUJ. Bogotá (Colombia). Dec 2021.
Doctoral Defense Committee of "Rodríguez Penalonga, L. «Modelo para la gestión sostenible del combustible nuclear gastado»". Universidad Pontificia Comillas. Madrid (Spain). Sep 2020.
Doctoral Defense Committee of "Moreno Barrado, A. «Hidrodinámica inducida por stress producido mediante irradiación iónica en materiales amorfizables: dinámica molecular y teoría»". Universidad Pontificia Comillas. Madrid (Spain). Jul 2016.
Reviewer in "Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility". Taylor & Francis Ltd. Abingdon (United Kingdom). Apr - May 2014.
Reviewer in "International Journal of Solid and Structures". Elsevier. Oxford (United Kingdom). Oct 2013.
Monograph "Introducción a Ansys". Universidad Politécnica de Madrid. ICE. Madrid (Spain). Jun 2010.

show 6 other activities

Dr. Alberto Carnicero López

Highlighted Publications

I. Granell, A. Ramos, A. Carnicero, "A geometry-based welding distortion prediction tool", Materials, Vol. 14, nº. 17, pp. 4789, September 2021. [Online: August 2021] doi: 10.3390/ma14174789 JCR-JIF: 3,748 Q1 (2021); 3,700 Q2 (2025) - SJR: 0,604 Q2 (2021); 0,617 Q2 (2025)

Journal Publications

I. Granell, A. Ramos, A. Carnicero, "A geometry-based welding distortion prediction tool", Materials, Vol. 14, nº. 17, pp. 4789, September 2021. [Online: August 2021] doi: 10.3390/ma14174789 JCR-JIF: 3,748 Q1 (2021); 3,700 Q2 (2025) - SJR: 0,604 Q2 (2021); 0,617 Q2 (2025)

L.F. S. Merchante, A. Carnicero, F.J. López-Valdés, J.R. Jiménez-Octavio, "La movilidad urbana como métrica de la COVID-19", Dyna (Spain), Vol. 96, nº. 4, pp. 368 - 372, July 2021. doi: 10.6036/9897 JCR-JIF: 2,070 Q3 (2021); 0,600 Q4 (2025) - SJR: 0,160 Q4 (2021); 0,153 Q4 (2024)

J. Munilla, M. Castro, A. Carnicero, "Surface effects in atomistic mechanical simulations of Al nanocrystals", Physical Review B, Vol. 80, nº. 2, pp. 24109.1 - 24109.9, July 2009. [Online: July 2009] doi: 10.1103/PhysRevB.80.024109 JCR-JIF: 3,900 Q2 (2025) - SJR: 1,235 Q1 (2025)

A. Cantizano, A. Carnicero, G. Zavarise, "Numerical simulation of wear-mechanism maps", Computational Materials Science, Vol. 25, nº. 1-2, pp. 54 - 60, September 2002. [Online: May 2002] doi: 10.1016/S0927-0256(02)00249-5 JCR-JIF: 0,856 (2002); 3,700 Q2 (2025) - SJR: 0,720 Q1 (2025)

A. Carnicero, R. Perera, E. Alarcón, "Modelo simplificado de daño por fatiga para hormigón armado", Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 17, nº. 1, pp. 83 - 98, January 2001. JCR-JIF: 0,700 Q4 (2025) - SJR: 0,176 Q4 (2025)

R. Perera, A. Carnicero, E. Alarcón, "A fatigue damage model for seismic response of RC structures", Computers & Structures, Vol. 78, nº. 1-3, pp. 293 - 302, November 2000. [Online: August 2000] doi: 10.1016/S0045-7949(00)00071-7 JCR-JIF: 5,600 Q1 (2025) - SJR: 1,243 Q1 (2025)

A. Carnicero, R. Perera, E. Alarcón, "Simplified model of low cycle fatigue for RC frames discussion", Journal of Structural Engineering, Vol. 125, nº. 10, pp. 1200 - 1202, October 1999. doi: 10.1061/(ASCE)0733-9445(1999)125:10(1200) JCR-JIF: 3,800 Q1 (2025) - SJR: 1,206 Q1 (2025)

Projects

Ph.D. Thesis

Developed:

Supervised:

In progress:

J. Asensio Gil, "UNDERSTANDING INJURY MECHANISMS IN E-SCOOTER RIDERS", PhD. dissertation, Comillas Pontifical University, Madrid, Spain.

I. Victoria Rodríguez, "Impact of active aerodynamics in vehicle stability and emergency breaking scenarios", PhD. dissertation, Comillas Pontifical University, Madrid, Spain.

Conference Papers

Books and Book Chapters

Invited Conferences and Seminars

Round table "The role of Engineering in post COVID-19 society". Universidad Pontificia Comillas. Madrid (Spain). Jun 2020.

Presentation "Optimización del sistema de alimentación y captación de energía: catenaria-pantógrafo y subestaciones" EnerTrain2010, Sistemas y nuevas tecnologías en ferrocarril para el ahorro energético. IIR-España. Madrid (Spain). Oct 2010.

Conference "Modelos de simulación dinámica catenaria-pantógrafo" International Rail Forum 2010. Valencia (Spain). May 2010.

Conference "Simulation models of catenary-pantograph dynamic interaction. Validation and applications" Workshop on Power transmission in High Speed Railways Systems. Amiens (France). Dec 2009.

Organization of Scientific Meetings

Organization of "Future Urban Mobility Challenge". Universidad Pontificia Comillas. Madrid (Spain). Feb 2022.

Organization of "Future Urban Mobility Challenge 2". Universidad Pontificia Comillas; y Ferrovial. Madrid (Spain). Feb 2021.

Working Papers

External Training Courses

External Relevant Positions

I. Granell, A. Ramos, A. Carnicero, "A geometry-based welding distortion prediction tool", Materials, Vol. 14, nº. 17, pp. 4789, September 2021. [Online: August 2021] doi: 10.3390/ma14174789
JCR-JIF: 3,748 Q1 (2021); 3,700 Q2 (2025) - SJR: 0,604 Q2 (2021); 0,617 Q2 (2025)

I. Granell, A. Ramos, A. Carnicero, "A geometry-based welding distortion prediction tool", Materials, Vol. 14, nº. 17, pp. 4789, September 2021. [Online: August 2021] doi: 10.3390/ma14174789
JCR-JIF: 3,748 Q1 (2021); 3,700 Q2 (2025) - SJR: 0,604 Q2 (2021); 0,617 Q2 (2025)

L.F. S. Merchante, A. Carnicero, F.J. López-Valdés, J.R. Jiménez-Octavio, "La movilidad urbana como métrica de la COVID-19", Dyna (Spain), Vol. 96, nº. 4, pp. 368 - 372, July 2021. doi: 10.6036/9897
JCR-JIF: 2,070 Q3 (2021); 0,600 Q4 (2025) - SJR: 0,160 Q4 (2021); 0,153 Q4 (2024)

J. Munilla, M. Castro, A. Carnicero, "Surface effects in atomistic mechanical simulations of Al nanocrystals", Physical Review B, Vol. 80, nº. 2, pp. 24109.1 - 24109.9, July 2009. [Online: July 2009] doi: 10.1103/PhysRevB.80.024109
JCR-JIF: 3,900 Q2 (2025) - SJR: 1,235 Q1 (2025)

A. Cantizano, A. Carnicero, G. Zavarise, "Numerical simulation of wear-mechanism maps", Computational Materials Science, Vol. 25, nº. 1-2, pp. 54 - 60, September 2002. [Online: May 2002] doi: 10.1016/S0927-0256(02)00249-5
JCR-JIF: 0,856 (2002); 3,700 Q2 (2025) - SJR: 0,720 Q1 (2025)

A. Carnicero, R. Perera, E. Alarcón, "Modelo simplificado de daño por fatiga para hormigón armado", Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 17, nº. 1, pp. 83 - 98, January 2001.
JCR-JIF: 0,700 Q4 (2025) - SJR: 0,176 Q4 (2025)

R. Perera, A. Carnicero, E. Alarcón, "A fatigue damage model for seismic response of RC structures", Computers & Structures, Vol. 78, nº. 1-3, pp. 293 - 302, November 2000. [Online: August 2000] doi: 10.1016/S0045-7949(00)00071-7
JCR-JIF: 5,600 Q1 (2025) - SJR: 1,243 Q1 (2025)

A. Carnicero, R. Perera, E. Alarcón, "Simplified model of low cycle fatigue for RC frames discussion", Journal of Structural Engineering, Vol. 125, nº. 10, pp. 1200 - 1202, October 1999. doi: 10.1061/(ASCE)0733-9445(1999)125:10(1200)
JCR-JIF: 3,800 Q1 (2025) - SJR: 1,206 Q1 (2025)