Dr. Juan Carlos del Real Romero

Current position:

Senior Associate Professor

Research Area:

Bioengineering; Railway Systems

Association date:

01/Mar/2012

Location:

AA25. D-511

Phone extension number:

+34 91 542-2800 ext. 2394

Email:

ORCID:

Researcher ID:

Google Scholar ID:

SCOPUS:

ResearchGate:

LinkedIn:

juan-carlos-del-real-romero-42686527

Areas of interest:

Adhesive bonding: adhesives suitable for each application; mechanical characterization of adhesive bonding; durability studies and failure modes; surface treatments to improve durability of the adhesive joints. Composites: preparation of polymer matrix composites reinforced by micro and nanoparticles; mechanical characterization; thermal analysis; applications as coatings; biomedical applications. Carbon based nanomaterials. Nanocomposites

Journal Publications

Hernando, C., Munilla, J., García-Tabarés, L., del Real-Romero, J.C., Castro, I., Cryogenic test stand for characterization of magnetocaloric materials. IEEE Transactions on Applied Superconductivity. Vol. 34, nº. 3, pp. 9501905-1 - 9501905-5, May 2024. [Online: February 2024] JCR: 1,800 Q3 (2022) - SJR: 0,536 Q2 (2022)
Abenojar, J., Ballesteros, Y., Bahrami, M., Martínez, M.A., del Real-Romero, J.C., Wear behavior of epoxy resin reinforced with ceramic nano- and microparticles. Polymers. Vol. 16, nº. 7, pp. 878-1 - 878-17, April 2024. [Online: March 2024] JCR: 5,000 Q1 (2022) - SJR: 0,720 Q1 (2022)
Bahrami, M., del Real-Romero, J.C., Mehdikhani, M., Butenegro, J.A., Abenojar, J., Martínez, M.A., Hybridization effect on interlaminar bond strength, flexural properties, and hardness of carbon–flax fiber thermoplastic bio-composites. Polymers. Vol. 15, nº. 24, pp. 4619-1 - 4619-18, December 2023. [Online: December 2023] JCR: 5,000 Q1 (2022) - SJR: 0,720 Q1 (2022)
Mendaza-DeCal, R., Ballesteros, Y., Peso-Fernández, S., del Real-Romero, J.C., Rodríguez-Quirós, J., Short communication: Torsional tests on long-bone cylindrical medullary-canal exo-endoprostheses. Research in Veterinary Science. Vol. 159, pp. 81 - 83, June 2023. [Online: April 2023] JCR: 2,400 Q1 (2022) - SJR: 0,577 Q1 (2022)
Abenojar, J., López de Armentia, S., Barbosa, A.Q., Martínez, M.A., del Real-Romero, J.C., Da Silva, L.F.M., Velasco, F., Magnetic cork particles as reinforcement in an epoxy resin: effect of size and amount on thermal properties. Journal of Thermal Analysis and Calorimetry. Vol. 148, nº. 5, pp. 1981 - 1995, March 2023. [Online: December 2022] JCR: 4,400 Q1 (2022) - SJR: 0,753 Q1 (2022)
Mendaza-DeCal, R., Ballesteros, Y., Peso-Fernández, S., Paz, E., del Real-Romero, J.C., Rodríguez-Quirós, J., Biomechanical test of a new endoprosthesis for cylindrical medullary canals in dogs. Frontiers in Veterinary Science. Vol. 9, pp. 887676-1 - 887676-13, 2022. [Online: June 2022] JCR: 3,200 Q1 (2022); - SJR: 0,737 Q1 (2022);
López de Armentia, S., Abenojar, J., Ballesteros, Y., del Real-Romero, J.C., Dunne, N., Paz, E., Polymerization kinetics of acrylic photopolymer loaded with graphene-based nanomaterials for additive manufacturing. Nanomaterials. Vol. 12, nº. 24, pp. 4498-1 - 4498-20, December 2022. [Online: December 2022] JCR: 5,300 Q1 (2022); - SJR: 0,811 Q1 (2022);
Mendaza-DeCal, R., Ballesteros, Y., Peso-Fernández, S., del Real-Romero, J.C., Rodríguez-Quirós, J., Biomechanical tests on long-bone elliptical medullary-canal endoprostheses for limb salvage in dogs. Animals. Vol. 12, nº. 21, pp. 3021-1 - 3021-15, November 2022. [Online: November 2022] JCR: 3,000 Q1 (2022); - SJR: 0,684 Q1 (2022);
Abenojar, J., López de Armentia, S., Martínez, M.A., del Real-Romero, J.C., Development of a green epoxy adhesive for cork by adding lignin: thermal and bonding properties. Wood Science and Technology. Vol. 56, nº. 3, pp. 721 - 742, May 2022. [Online: March 2022] JCR: 3,400 Q1 (2022); - SJR: 0,558 Q1 (2022);
López de Armentia, S., Fernández-Villamarín, S., Ballesteros, Y., del Real-Romero, J.C., Dunne, N., Paz, E., 3D printing of a graphene-modified photopolymer using stereolithography for biomedical applications: a study of the polymerization reaction. International Journal of Bioprinting. Vol. 8, nº. 1, pp. 503-182 - 503-197, 2022. [Online: January 2022] JCR: 8,400 (2022); - SJR: 0,821 (2022);
Abenojar, J., Martínez, M.A., López de Armentia, S., Paz, E., del Real-Romero, J.C., Velasco, F., Mechanical properties and fire-resistance of composites with marble particles. Journal of Materials Research and Technology. Vol. 12, pp. 1403 - 1417, June 2021. [Online: March 2021] JCR: 6,267 Q1 (2021); 6,400 Q1 (2022) - SJR: 0,964 Q1 (2021); 1,050 Q1 (2022)
Paz, E., Ballesteros, Y., Abenojar, J., Dunne, N., del Real-Romero, J.C., Advanced G-MPS-PMMA bone cements: influence of graphene silanisation on fatigue performance, thermal properties and biocompatibility. Nanomaterials. Vol. 11, nº. 1, pp. 139-1 - 139-17, January 2021. [Online: January 2021] JCR: 5,719 Q1 (2021); 5,300 Q1 (2022) - SJR: 0,839 Q1 (2021); 0,811 Q1 (2022)
López de Armentia, S., del Real-Romero, J.C., Paz, E., Dunne, N., Advances in biodegradable 3D printed scaffolds with carbon-based nanomaterials for bone regeneration. Materials. Vol. 13, nº. 22, pp. 5083-1 - 5083-49, November 2020. [Online: November 2020] JCR: 3,623 Q1 (2020); 3,400 Q2 (2022) - SJR: 0,682 Q2 (2020); 0,563 Q2 (2022)
Abenojar, J., López de Armentia, S., Barbosa, A.Q., Martínez, M.A., Velasco, F., Da Silva, L.F.M., del Real-Romero, J.C., Coating cork particles with iron oxide: effect on magnetic properties. Wood Science and Technology. Vol. 54, nº. 4, pp. 869 - 889, July 2020. [Online: May 2020] JCR: 2,506 Q1 (2020); 3,400 Q1 (2022) - SJR: 0,631 Q1 (2020); 0,558 Q1 (2022)
Paz, E., Ballesteros, Y., Forriol Campos, F., Dunne, N., del Real-Romero, J.C., Graphene and graphene oxide functionalisation with silanes for advanced dispersion and reinforcement of PMMA-based bone cements. Materials Science & Engineering C-Materials for Biological Applications. Vol. 104, pp. 109946-1 - 109946-12, November 2019. [Online: July 2019] JCR: 5,880 Q1 (2019); 7,900 Q1 (2022) - SJR: 1,149 Q1 (2019); 1,086 Q1 (2022)
Paz, E., Ballesteros, Y., Abenojar, J., del Real-Romero, J.C., Dunne, N., Graphene oxide and graphene reinforced PMMA bone cements: evaluation of thermal properties and biocompatibility. Materials. Vol. 12, nº. 19, pp. 3146-1 - 3146-14, October 2019. [Online: September 2019] JCR: 3,057 Q2 (2019); 3,400 Q2 (2022) - SJR: 0,647 Q2 (2019); 0,563 Q2 (2022)
Sanz-Ruiz, P., Carbó-Laso, E., del Real-Romero, J.C., Arán-Ais, F., Ballesteros, Y., Paz, E., Sánchez-Navarro, M.M., Pérez-Limiñana, M.A., Vaquero-Martín, J., Microencapsulation of rifampicin: a technique to preserve the mechanical properties of bone cement. Journal of Orthopaedic Research. Vol. 36, nº. 1, pp. 459 - 466, January 2018. [Online: May 2017] JCR: 3,043 Q1 (2018); 2,800 Q2 (2022) - SJR: Q1 (2018); 0,821 Q2 (2022)
Carbó-Laso, E., Sanz-Ruiz, P., del Real-Romero, J.C., Ballesteros, Y., Paz, E., Arán-Ais, F., Sánchez-Navarro, M.M., Pérez-Limiñana, M.A., López-Torres, I., Vaquero-Martín, J., Nuevo método de liberación de antibióticos del cemento óseo (polimetilmetacrilato): redefiniendo los límites. Revista Española de Cirugía Ortopédica y Traumatología. Vol. 62, nº. 1, pp. 86 - 92, January 2018. [Online: November 2017] SJR: Q3 (2018); 0,274 Q3 (2022)
Paz, E., Forriol Campos, F., del Real-Romero, J.C., Dunne, N., Graphene oxide versus graphene for optimisation of PMMA bone cement for orthopaedic applications. Materials Science & Engineering C-Materials for Biological Applications. Vol. 77, pp. 1003 - 1011, August 2017. [Online: March 2017] JCR: 5,080 Q1 (2017); 7,900 Q1 (2022) - SJR: Q1 (2017); 1,086 Q1 (2022)
Abenojar, J., Tutor, J., Ballesteros, Y., del Real-Romero, J.C., Martínez, M.A., Erosion-wear, mechanical and thermal properties of silica filled epoxy nanocomposites. Composites Part B: Engineering. Vol. 120, pp. 42 - 53, July 2017. [Online: April 2017] JCR: 4,920 Q1 (2017); 13,100 Q1 (2022) - SJR: Q1 (2017); 2,300 Q1 (2022)
del Real-Romero, J.C., Jiménez-Octavio, J.R., Manoharan, R., Muthuselvam, R.S., Joseph, R., Sakthi Sudhan, H.H., Characterisation of mechanical properties of aluminium composites fabricated by stir-casting and powder metallurgy. International Journal of Mechanical Engineering and Technology. Vol. 8, nº. 6, pp. 176 - 189, June 2017. [Online: June 2017] SJR: 0,293 Q2 (2019)
del Real-Romero, J.C., Jiménez-Octavio, J.R., Sakthi Sudhan, H.H., Manoharan, R., Inbaraj, R., Characterisation and cohesive zone modelling of adhesives and bone cements used in prothesis fixation surgeries. International Journal of Multidisciplinary Educational Research. Vol. 6, nº. 4, pp. 260 - 278, April 2017.
Paz, E., Narbón Prieto, J.J., Abenojar, J., Cledera-Castro, M.M., del Real-Romero, J.C., Influence of acrylic adhesive viscosity and surface roughness on the properties of adhesive joint. The Journal of Adhesion. Vol. 92, nº. 11, pp. 877 - 891, November 2016. [Online: July 2015] JCR: 1,628 Q2 (2016); 2,200 Q3 (2022) - SJR: Q2 (2016); 0,437 Q2 (2022)
Paz, E., Abenojar, J., Ballesteros, Y., Forriol Campos, F., Dunne, N., del Real-Romero, J.C., Mechanical and thermal behaviour of an acrylic bone cement modified with a triblock copolymer. Journal of Materials Science: Materials in Medicine. Vol. 27, nº. 4, pp. 72-1 - 72-10, April 2016. [Online: February 2016] JCR: 2,325 Q2 (2016); 3,700 Q2 (2022) - SJR: Q2 (2016); 0,580 Q2 (2022)
Abenojar, J., Pantoja, M., Martínez, M.A., del Real-Romero, J.C., Aging by moisture and/or temperature of epoxy/SiC composites: thermal and mechanical properties. Journal of Composite Materials. Vol. 49, nº. 24, pp. 2963 - 2975, October 2015. [Online: November 2014] JCR: 1,242 Q3 (2015); 2,900 Q3 (2022) - SJR: 0,593 Q2 (2022)
Abat, F., Sarasquete, J., Natera, L.G., Calvo, A., Pérez-España Muniesa, M., Zurita, N., Ferrer, J., del Real-Romero, J.C., Paz, E., Forriol Campos, F., Biomechanical analysis of acromioclavicular joint dislocation repair using coracoclavicular suspension devices in two different configurations. Journal of Orthopaedics and Traumatology. Vol. 16, pp. 215 - 219, September 2015. [Online: March 2015] JCR: 2,800 Q2 (2022) - SJR: 0,941 Q1 (2022)
Paz, E., Sanz-Ruiz, P., Abenojar, J., Vaquero-Martín, J., Forriol Campos, F., del Real-Romero, J.C., Evaluation of elution and mechanical properties of high-dose antibiotic-loaded bone cement: comparative «in vitro» study of the influence of vancomycin and cefazolin. The Journal of Arthroplasty. Vol. 30, nº. 8, pp. 1423 - 1429, August 2015. [Online: March 2015] JCR: 2,515 Q1 (2015); 3,500 Q1 (2022) - SJR: 2,028 Q1 (2022)
Barbosa, A.Q., Da Silva, L.F.M., Abenojar, J., del Real-Romero, J.C., Paiva, R.M.M., Öchsner, A., Kinetic analysis and characterization of an epoxy/cork adhesive. Thermochimica Acta. Vol. 604, pp. 52 - 60, March 2015. [Online: January 2015] JCR: 1,938 Q2 (2015); 3,500 Q2 (2022) - SJR: 0,613 Q2 (2022)
del Real-Romero, J.C., Guest editorial. The Journal of Adhesion. Vol. 90, nº. 10, pp. 815 - 816, October 2014. [Online: May 2014] JCR: 1,417 Q2 (2014); 2,200 Q3 (2022) - SJR: Q2 (2014); 0,437 Q2 (2022)
Abenojar, J., Encinas, N., del Real-Romero, J.C., Martínez, M.A., Polymerization kinetics of boron carbide/epoxy composites. Thermochimica Acta. Vol. 575, pp. 144 - 150, January 2014. [Online: November 2013] JCR: 2,184 Q2 (2014); 3,500 Q2 (2022) - SJR: Q1 (2014); 0,613 Q2 (2022)
Sanz-Ruiz, P., Paz, E., Abenojar, J., del Real-Romero, J.C., Vaquero-Martín, J., Forriol Campos, F., Effects of vancomycin, cefazolin and test conditions on the wear behavior of bone cement. The Journal of Arthroplasty. Vol. 29, nº. 1, pp. 16 - 22, January 2014. [Online: May 2013] JCR: 2,666 Q1 (2014); 3,500 Q1 (2022) - SJR: Q1 (2014); 2,028 Q1 (2022)
Abenojar, J., Barbosa, A.Q., Ballesteros, Y., del Real-Romero, J.C., Da Silva, L.F.M., Martínez, M.A., Effect of surface treatments on natural cork: surface energy, adhesion and acoustic insulation. Wood Science and Technology. Vol. 48, nº. 1, pp. 207 - 224, January 2014. [Online: October 2013] JCR: 1,920 Q1 (2014); 3,400 Q1 (2022) - SJR: Q1 (2014); 0,558 Q1 (2022)
Sanz-Ruiz, P., Paz, E., Abenojar, J., del Real-Romero, J.C., Forriol Campos, F., Vaquero-Martín, J., Influencia del medio fisiológico sobre las propiedades mecánicas del cemento óseo. ¿Son los estudios actuales extrapolables?. Revista Española de Cirugía Ortopédica y Traumatología. Vol. 58, nº. 1, pp. 3 - 10, January 2014. [Online: December 2013] SJR: Q4 (2014); 0,274 Q3 (2022)
Paz, E., Abenojar, J., Cledera-Castro, M.M., Ballesteros, Y., Forriol Campos, F., del Real-Romero, J.C., Estudio del efecto de distintos tipos de nanocargas en el comportamiento mecánico y térmico de un cemento óseo. Trauma Fundación MAPFRE. Vol. 24, nº. 3, pp. 175 - 181, September 2013. SJR: Q4 (2013); 0,105 Q4 (2021)
Barbosa, A.Q., Da Silva, L.F.M., Öchsner, A., Abenojar, J., del Real-Romero, J.C., Utilization of microparticles of cork as reinforcing material for fragile structural adhesives. Ciência & Tecnologia dos Materiais. Vol. 25, nº. 1, pp. 42 - 49, June 2013. SJR: Q4 (2013); 0,218 Q3 (2020)
Barbosa, A.Q., Da Silva, L.F.M., Öchsner, A., Abenojar, J., del Real-Romero, J.C., Influence of the size and amount of cork particles on the impact toughness of a structural adhesive. The Journal of Adhesion. Vol. 88, nº. 4-6, pp. 452 - 470, 2012. [Online: April 2012] JCR: 0,857 Q2 (2012); 2,200 Q3 (2022) - SJR: Q2 (2012); 0,437 Q2 (2022)
Abenojar, J., Martínez, M.A., Pantoja, M., Velasco, F., del Real-Romero, J.C., Epoxy composite reinforced with nano and micro SiC particles: curing kinetics and mechanical properties. The Journal of Adhesion. Vol. 88, nº. 4-6, pp. 418 - 434, 2012. [Online: April 2012] JCR: 0,857 Q2 (2012); 2,200 Q3 (2022) - SJR: Q2 (2012); 0,437 Q2 (2022)
Sanz-Ruiz, P., Paz, E., del Real-Romero, J.C., Abenojar, J., Vaquero-Martín, J., Forriol Campos, F., Influencia de cefazolina y vancomicina en la resistencia al desgaste del cemento óseo. Trauma Fundación MAPFRE. Vol. 23, nº. 1, pp. 59 - 63, March 2012. SJR: Q4 (2012); 0,105 Q4 (2021)
Abenojar, J., Martínez, M.A., Velasco, F., del Real-Romero, J.C., Effect of moisture and temperature on the mechanical properties of an epoxy reinforced with boron carbide. Journal of Adhesion Science and Technology. Vol. 25, nº. 18, pp. 2445 - 2460, 2011. JCR: 0,948 Q3 (2011); 2,300 Q3 (2022) - SJR: Q2 (2011); 0,438 Q2 (2022)
Zapico, A., Molisani, L., del Real-Romero, J.C., Ballesteros, Y., Global fault detection in adhesively bonded joints using artificial intelligence. Journal of Adhesion Science and Technology. Vol. 25, nº. 18, pp. 2435 - 2443, 2011. JCR: 0,948 Q3 (2011); 2,300 Q3 (2022) - SJR: Q2 (2011); 0,438 Q2 (2022)
Martínez, M.A., Pantoja, M., Abenojar, J., del Real-Romero, J.C., Velasco, F., Influence of thread geometry on the performance of retaining anaerobic adhesives. International Journal of Adhesion and Adhesives. Vol. 31, nº. 6, pp. 429 - 433, September 2011. [Online: March 2011] JCR: 2,170 Q2 (2011); 3,400 Q2 (2022) - SJR: Q1 (2011); 0,723 Q1 (2022)
del Real-Romero, J.C., Ballesteros, Y., Chamochín, R., Abenojar, J., Molisani, L., Influence of surface preparation on the fracture behavior of acrylic adhesive/CFRP composite joints. The Journal of Adhesion. Vol. 87, nº. 4, pp. 366 - 381, 2011. [Online: April 2011] JCR: 1,310 Q2 (2011); 2,200 Q3 (2022) - SJR: Q2 (2011); 0,437 Q2 (2022)
Chamochín, R., Cano, M., Abenojar, J., Pantoja, M., Ballesteros, Y., del Real-Romero, J.C., The effect of surface treatment on the behavior of toughened acrylic adhesive/GRP(epoxy) composite joints. Journal of Adhesion Science and Technology. Vol. 24, nº. 11-12, pp. 1903 - 1916, 2010. JCR: 0,992 (2010); 2,300 Q3 (2022) - SJR: 0,438 Q2 (2022)
Pantoja, M., Martínez, M.A., Abenojar, J., Velasco, F., del Real-Romero, J.C., Structural and mechanical characterization of gamma-methacryloxypropyltrimethoxysilane (MPS) on Zn-electrocoated steel. Journal of Adhesion Science and Technology. Vol. 24, nº. 11-12, pp. 1885 - 1901, 2010. JCR: 0,992 (2010); 2,300 Q3 (2022) - SJR: 0,438 Q2 (2022)
Pantoja, M., Velasco, F., Broekema, D., Abenojar, J., del Real-Romero, J.C., The influence of pH on the hydrolysis process of y-methacryloxypropyltrimethoxysilane, analyzed by FT-IR, and the silanization of electrogalvanized steel. Journal of Adhesion Science and Technology. Vol. 24, nº. 6, pp. 1131 - 1143, 2010. JCR: 0,992 (2010); 2,300 Q3 (2022) - SJR: 0,438 Q2 (2022)
Martínez, M.A., Muñoz, P., Abenojar, J., Velasco, F., del Real-Romero, J.C., Optimization of the design of a double-cup specimen using the finite element method for testing adhesive bonds under tensile loads. Journal of Adhesion Science and Technology. Vol. 23, nº. 10-11, pp. 1357 - 1368, 2009. JCR: 1,175 (2009); 2,300 Q3 (2022) - SJR: 0,438 Q2 (2022)
Abenojar, J., del Real-Romero, J.C., Martínez, M.A., Cano, M., Effect of silane treatment on SiC particles used as reinforcement in epoxy resins. The Journal of Adhesion. Vol. 85, nº. 6, pp. 287 - 301, 2009. [Online: May 2009] JCR: 0,688 (2009); 2,200 Q3 (2022) - SJR: 0,437 Q2 (2022)
Pantoja, M., Díaz-Benito, B., Velasco, F., Abenojar, J., del Real-Romero, J.C., Analysis of hydrolysis process of g-methacryloxypropyltrimethoxysilane and its influence on the formation of silane coatings on 6063 aluminum alloy. Applied Surface Science. Vol. 255, nº. 12, pp. 6386 - 6390, April 2009. [Online: February 2009] JCR: 1,616 (2009); 6,700 Q1 (2022) - SJR: 1,187 Q1 (2022)
del Real-Romero, J.C., Cano, M., Abenojar, J., Pantoja, M., Martínez, M.A., Influence of silanisation parameters with y-methacryloxypropyltrimethoxysilane on durability of aluminium/acrylic adhesive joints. Journal of Adhesion Science and Technology. Vol. 22, nº. 13, pp. 1461 - 1475, 2008. JCR: 0,869 (2008); 2,300 Q3 (2022) - SJR: 0,438 Q2 (2022)
Martínez, M.A., Velasco, F., Abenojar, J., Pantoja, M., del Real-Romero, J.C., Analytical solution to calculate the stress distribution in pin-and-collar samples bonded with anaerobic adhesives (following ISO 10123 standard). International Journal of Adhesion and Adhesives. Vol. 28, nº. 8, pp. 405 - 410, December 2008. [Online: April 2008] JCR: 1,678 (2008); 3,400 Q2 (2022) - SJR: 0,723 Q1 (2022)
Pantoja, M.A., Velasco, F., Abenojar, J., Martínez Baena, M.A., Durban, M., del Real-Romero, J.C., Fiabilidad de los adhesivos anaeróbicos como fijadores y retenedores de pasadores y roscas. Revista de plásticos modernos. Ciencia y tecnología de polímeros. Nº. 614, pp. 160 - 164, August 2007.
del Real-Romero, J.C., Cano, M., Abenojar, J., Martínez, M.A., Adhesive bonding of aluminium with structural acrylic adhesives: durability in wet environments. Journal of Adhesion Science and Technology. Vol. 20, nº. 16, pp. 1801 - 1818, 2006. JCR: 0,868 (2006); 2,300 Q3 (2022) - SJR: 0,438 Q2 (2022)
López, F., Suárez, J.C., Diez de Ulzurrum, I., Biezma, M.V., Ruiz, J.M., del Real-Romero, J.C., Martínez, M.A., Case studies in adhesives selection. Journal of Materials Processing Technology. Vol. 143-144, pp. 219 - 224, December 2003. [Online: May 2003] JCR: 6,300 Q2 (2022) - SJR: 1,485 Q1 (2022)

show 53 journal publications

Projects

show 6 projects

Ph.D. Thesis

show 5 Ph.D. Thesis

Conference Papers

show 73 conference papers

Books and Book Chapters

show 7 books and book chapters

International Exchanges

Aug 2016, School of Mechanical and Manufacturing Engineering, Dublin City University (DCU). Dublin (Ireland).
Mar 2012, School of Mechanical & Aerospace Engineering, Queen's University of Belfast. Belfast (United Kingdom).
Jul - Sep 2003Virginia Polytechnic Institute and State University. Blacksburg (United States of America). Tecnología de adhesivos.
Aug 2002 - Feb 2003Virginia Polytechnic Institute and State University. Blacksburg (United States of America). Tecnología de adhesivos.

show 4 international exchanges

Invited Conferences and Seminars

Round table "Internships at ICAI: analysis and trends" VIII Congreso Nacional de Igenieros del ICAI «Somos historia que construye futuro». Colegio de Ingenieros del ICAI. Madrid (Spain). Nov 2021.
Chair in "1st International Conference on Advanced Joining Processes - AJP 2019. Session 1C. Adhesive bonding I". Universidade do Porto. Ponta Delgada (Portugal). Oct 2019.
Conference "Metalurgia e hipermedia, una innovación en la enseñanza" III Jornadas Universitarias sobre innovación educativa en las enseñanzas técnicas. Universidade da Coruña. El Ferrol (Spain). Sep 1995.

show 3 invited conferences and seminars

Organization of Scientific Meetings

Member of Committee at "1st International Conference on Bio-Joining". Universidade do Porto. Porto (Portugal). Dec 2024.
Member of Committee at "1st International Conference on Bio-joining - BJ2024". Universidade do Porto. Porto (Portugal). Dec 2024.
Member of Committee at "XXII Congreso Internacional de Adhesión y Adhesivos". Grupo Español de Adhesión y Adhesivos (GEAA); y Asociación Española de Fabricantes de Colas y Adhesivos (ASEFCA). Malaga (Spain). Nov 2023.
Member of Committee at "14th European Adhesion Conference (EURADH) & 7th World Congress on Adhesion and Related Phenomena (WCARP)". DECHEMA Gesellschaft für Chemische Technik und Biotechnologie e.V. Garmisch-Partenkirchen (Germany). Sep 2023.
Member of Committee at "13th European Adhesion Conference - EURADH 21". French adhesion division (SFA). Online. Oct 2021.
Member of Committee at "1st International Conference on Industrial Applications of Adhesives 2020 - IAA 2020". Universidade do Porto. Madeira (Portugal). Mar 2020.
Permanent member at "International Conference on Industrial Applications of Adhesives" Jan 2020 - Jan 2021.
Permanent member at "International Conference on Science and Technology Education" Jan 2020 - Jan 2021.
Permanent member at "International Conference on Advanced Joining Processes - AJP" Jan 2019 - Today.
Member of Committee at "4th International Congress on welding and joining technologies". CESOL. Seville (Spain). Jan 2019 - May 2020.
Member of Committee at "8th International Conference on Advanced Computational Engineering and Experimenting - ACEX 2014". IRONIX Conferences. Paris (France). Jun - Jul 2014.
Member of Committee at "7th International Conference on Advanced Computational Engineering and Experimenting - ACE-X 2013". IRONIX Conferences. Madrid (Spain). Jul 2013.
Organization of "7th International Conference on Advanced Computational Engineering and Experimenting - ACE-X 2013 ". IRONIX Conferences. Madrid (Spain). Jul 2013.
Member of Committee at "6th International Conference on Advanced Computational Engineering and Experimenting - ACE-X 2012". Ironix Conferences. Istanbul (Turkey). Jul 2012.
Permanent member at "International Conference on Structural Adhesive Bonding" Porto (Portugal). Jan 2011 - Today.
Member of Committee at "4th International Conference on Advanced Computational Engineering and Experimenting - ACE-X 2010". Ironix Conferences. Paris (France). Jul 2010.
Member of Committee at "VIII Jornadas Nacionales de Adhesivos". Universidad de Extremadura en colaboración con GCTAA. Badajoz (Spain). Sep 2007.
Member of Committee at "VII Jornadas sobre Adhesión y Adhesivos". GCTAA en colaboración con AETEPA. Barcelona (Spain). Oct 2006.
Member of Committee at "VI Jornadas Nacionales sobre Adhesivos". AIDIMA en colaboración con el GCTAA. Valencia (Spain). Jun - Jul 2005.
Member of Committee at "V Jornadas Nacionales sobre Adhesivos". E.T.S.I. Navales de la UPM en colaboración con el GCTAA. Madrid (Spain). Jun 2004.
Member of Committee at "IV Jornadas Nacionales de Adhesivos". CIDEMCO en colaboración con el GCTAA. San Sebastian (Spain). Oct 2003.
Member of Committee at "III Jornadas Nacionales sobre Adhesivos". Barcelona (Spain). Jun 2002.
Member of Committee at "II Jornadas Nacionales de Adhesivos". Alicante (Spain). Sep 2001.
Organization of "I Jornadas sobre Tecnología de Adhesivos". Leganes (Spain). Oct 2000.
Permanent member at "Congress of Adhesion and Adhesives" Grupo Español de Adhesión y Adhesivos (GEAA). Zaragoza (Spain). Jan 2000 - Today.

show 25 organization of scientific meetings

External Training Courses

show 33 external training courses

Patents

"Procedimiento para la producción de partículas de corcho magnéticas, partículas así obtenidas y usos de las mismas". Owner(s): Universidad Carlos III de Madrid; Instituto de Ciência e Inovaçao em Engenharia Mecânica e Engenharia Industrial; Universidade do Porto; y Universidad Pontificia Comillas. Priority country: Madrid (Spain). May 2019
"Bone cement with microencapsulated antimicrobial". Owner(s): Universidad Pontificia Comillas; INESCOP. Priority country: Madrid (Spain). Oct 2017

show 2 patents

External Relevant Positions

Editor at "Materials. Special Issue "Mechanical Properties of Biocomposites"" MDPI AG. Basel (Switzerland). Oct 2021.
Member of Editorial Board of the «Journal of Advanced Joining Processes» Elsevier B.V. Amsterdam (Netherlands). Oct 2019 - Today.
Editor at "Journal of Adhesion. Volume 90, Issue 10, 2014. Special Issue. pp.815-816. D.O.I.: 10.1080/00218464.2014.909277" Taylor & Francis Ltd. Philadelphia (United States of America). May 2014.
Scientific Coordinator Grupo Español de Adhesión y Adhesivos. Alicante (Spain). Oct 2013 - Today.
Member of Editorial Board of the «Applied Adhesion Science» journal Springer. Heidelberg (Germany). Jul 2013 - Today.
Member of Editorial Advisory Board of the «Journal of Adhesion» Taylor & Francis Ltd. Philadelphia (United States of America). Sep 2012 - Today.
Editor at "Tendencias en adhesión y adhesivos. Volumen III." Universidad Pontificia Comillas. Madrid (Spain). Sep 2010.
President Grupo Español de Adhesión y Adhesivos. Alicante (Spain). Dec 2009 - Sep 2013.
Standardization Technical Committee 143 «Adhesives» AENOR. Madrid (Spain). Jan 2002 - Today.

show 9 external relevant positions

Media and research dissemination

"5X08 -Challenging the traditional banking systemHaz clic para usar esta alternativa". Casting the Future. (Mar 2024)
"FEM analysis of strength and stability of knee prostheses". Asociación/Colegio Nacional de Ingenieros de ICAI. (Oct 2016)

show 2 media and research dissemination

Fellowships and Awards

Director of prizewinning work in "Honorary Distinction to the best Doctoral Thesis on Engineering «Bone cements reinforced with carbon based nanomaterials» by Eva Paz ". Universidad Pontificia Comillas. Madrid (Spain). Jan 2018.
«Nuevo método de liberación de antibióticos del cemento óseo (polimetilmetracrilato): redefiniendo los límites » "SECOT Foundation Prize. Basic Research in Orthopedic Surgery and Traumatology". Fundación de la Sociedad Española de Cirugía Ortopédica y Traumatología (SECOT). Barcelona (Spain). Sep 2016.
«Influencia del medio fisiológico sobre las propiedades mecánicas del cemento óseo» "Award Foundation SECOT Basic Research in Orthopedic Surgery and Traumatology". Fundación de la Sociedad Española de Cirugía Ortopédica y Traumatología (SECOT). Barcelona (Spain). Oct 2013.
Fellowship "Erasmus Scholarship «Teachers / Researcher» Training". Queen´s University. Belfast (United Kingdom). Mar 2012.
Fellowship "Erasmus Scholarship «Teachers / Researcher» Training". Universidade do Porto. Facultade de Engenharia. Porto (Portugal). Sep 2011.
Fellowship "Erasmus Scholarship «Teachers / Researcher» Training". Universidade do Porto. Facultade de Engenharia. Porto (Portugal). Jun - Jul 2008.
Fellowship "Beca Agencia Española de Cooperación Internacional". Pontificia Universidad Católica del Perú. Lima (Peru). Jul - Aug 2000.
Fellowship "Beca Agencia Española de Cooperación Internacional". Pontificia Universidad Católica del Perú. Lima (Peru). Aug - Sep 1997.

show 8 fellowships and awards

Other Activities

Doctoral Defense Committee of "León Román, V. E. «Estudio comparativo biomecánico de la rotación del componente tibial entre la prótesis en bisagra rotatoria y las prótesis de constricción condilar varo-valgo»". Universidad Complutense de Madrid. Madrid (Spain). Jun 2021.
Doctoral Defense Committee of "Munilla López, J.: «Development of a novel concept of efficient superconducting magnet for radioisotope production cyclotron»". Universidad Pontificia Comillas. Madrid (Spain). Jan 2020.
Doctoral Defense Committee of "Gálvez Villarino, P. «Aplicación de la tecnología de adhesivos en estructuras multimaterial: empleo de adhesivos tenaces»". Universidad Carlos III de Madrid. Madrid (Spain). Jan 2020.
Doctoral Defense Committee of "López Torres, I. I. «Estudio in vivo de la eficacia del cemento óseo con rifampicina contenida en microcápsulas de alginato en el tratamiento de la infección protésica»". Universidad Complutense de Madrid. Madrid (Spain). Nov 2018.
Doctoral Defense Committee of "Enciso Ramos, M. B. «Durabilidad y biodeterioro de materiales compuestos de matriz polimérica reforzados con fibras naturales: efecto de tratamientos de plasma»". Universidad Carlos III de Madrid. Madrid (Spain). Jul 2018.
Reviewer in "Journal of Materials Processing Technology". Elsevier Science S.A. Lausanne (Switzerland). Jan 2018 - Today.
Reviewer in "Materials Science & Engineering C: Materials for Biological Applications". Elsevier Science BV. Amsterdam (Netherlands). Jan 2018 - Today.
Doctoral Defense Committee of "Martín Sastre, C. «Evaluación medioambiental de la generación de energía eléctrica a partir de biomasa agrícola en España mediante análisis de ciclo de vida»". Universidad Pontificia Comillas. Madrid (Spain). Jul 2017.
Director of research work "Caracterización de materiales compuestos reforzados con nanomateriales base carbono". Instituto Universitario del Ejército. Buenos Aires (Argentina). Jan - Mar 2017.
Reviewer in "Biomimetics". MDPI AG. Basel (Switzerland). Jan 2017 - Today.
Reviewer in "Microscopy and Microanalysis". Cambridge Univ Press. New York (United States of America). Jan 2017 - Today.
Reviewer in "Mechanics of Advanced Composite Structures". Semnan University. Semnan (Iran). Jan 2017 - Today.
Doctoral Defense Committee of "López Torres, I. I. «Estudio in vivo de la eficacia del cemento óseo con rifampicina contenida en microcápsulas de alginato en el tratamiento de la infección protésica»". Universidad Europea de Madrid. Villaviciosa de Odón (Spain). Sep 2016.
Doctoral Defense Committee of "de Sousa Marques, E.A. «High temperature mixed-adhesive joints for aerospace applications»". Universidade do Porto. Porto (Portugal). Apr 2016.
Reviewer in "Journal of Composite Materials". Sage Publications Ltd. London (United Kingdom). Jan 2016 - Today.
Reviewer in "Advances in Polymer Technology". Wiley-Blackwell. Hoboken (United States of America). Jan 2016 - Today.
Reviewer in "Textile Research Journal". Sage Publications Ltd. London (United Kingdom). Jan 2016 - Today.
Reviewer in "Cellulose". Springer. Dordrecht (Netherlands). Jan 2016 - Today.
Doctoral Defense Committee of "Ayala Santamaría, P. «An experimental and numerical study on the smoke layer growth and movement within large-volume spaces: atrium fires»". Universidad Pontificia Comillas. Madrid (Spain). Jul 2015.
Reviewer in "Science and Engineering of Composite Materials". Walter de Gruyter GmbH. Berlin (Germany). Jan 2015 - Today.
Reviewer in "Polymer International". Wiley-Blackwell. Hoboken (United States of America). Jan 2015 - Today.
Doctoral Defense Committee of "Serrano Remón, I.P. «Análisis de sistemas de conversión de potencia en reactores nucleares de fusión con envolturas regeneradoras de doble refrigerante»". Universidad Pontificia Comillas. Madrid (Spain). Sep 2014.
Prologue in "The Journal of Adhesion. Volume 90, Issue 10, 2014 Special Issue. pp.815-816. D.O.I.: 10.1080/00218464.2014.909277". Taylor & Francis Ltd. Philadelphia (United States of America). May 2014.
Reviewer in "Journal of Testing and Evaluation". ASTM International. West Conshohocken (United States of America). Jan 2014 - Today.
Reviewer in "Composites Part B: Engineering". Elsevier SCI Ltd. Oxford (United Kingdom). Jan 2014 - Today.
Reviewer in "Measurement Science and Technology". IOP Publishing Ltd. Bristol (United Kingdom). Jan 2014 - Today.
Reviewer in "Journal of Materials Science: Materials in Medicine". Springer. Dordrecht (Netherlands). Jan 2014 - Today.
Doctoral Defense Committee of "Cuesta Garrote, N. « Adhesivos proteicos bioinspirados para calzado»". Universidad de Alicante. Alicante (Spain). Nov 2013.
Reviewer in "Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications". Sage Publications Ltd. London (United Kingdom). Jan 2013 - Today.
Reviewer in "Applied Adhesion Science". Springer. London (United Kingdom). Jan 2013 - Today.
Reviewer in "Surface and Coatings Technology". Esevier Science S.A. Lausanne (Switzerland). Jan 2013 - Today.
Reviewer in "Applied Surface Science". Elsevier Science B.V. Amsterdam (Netherlands). Jan 2013 - Today.
Reviewer in "Journal of Adhesion". Taylor & Francis Ltd. Abingdon (United Kingdom). Jan 2011 - Today.

show 33 other activities

Dr. Juan Carlos del Real Romero

Journal Publications

Abenojar, J., Ballesteros, Y., Bahrami, M., Martínez, M.A., del Real-Romero, J.C., Wear behavior of epoxy resin reinforced with ceramic nano- and microparticles. Polymers. Vol. 16, nº. 7, pp. 878-1 - 878-17, April 2024. [Online: March 2024] JCR: 5,000 Q1 (2022) - SJR: 0,720 Q1 (2022)

del Real-Romero, J.C., Guest editorial. The Journal of Adhesion. Vol. 90, nº. 10, pp. 815 - 816, October 2014. [Online: May 2014] JCR: 1,417 Q2 (2014); 2,200 Q3 (2022) - SJR: Q2 (2014); 0,437 Q2 (2022)

Abenojar, J., Encinas, N., del Real-Romero, J.C., Martínez, M.A., Polymerization kinetics of boron carbide/epoxy composites. Thermochimica Acta. Vol. 575, pp. 144 - 150, January 2014. [Online: November 2013] JCR: 2,184 Q2 (2014); 3,500 Q2 (2022) - SJR: Q1 (2014); 0,613 Q2 (2022)

Barbosa, A.Q., Da Silva, L.F.M., Öchsner, A., Abenojar, J., del Real-Romero, J.C., Utilization of microparticles of cork as reinforcing material for fragile structural adhesives. Ciência & Tecnologia dos Materiais. Vol. 25, nº. 1, pp. 42 - 49, June 2013. SJR: Q4 (2013); 0,218 Q3 (2020)

Sanz-Ruiz, P., Paz, E., del Real-Romero, J.C., Abenojar, J., Vaquero-Martín, J., Forriol Campos, F., Influencia de cefazolina y vancomicina en la resistencia al desgaste del cemento óseo. Trauma Fundación MAPFRE. Vol. 23, nº. 1, pp. 59 - 63, March 2012. SJR: Q4 (2012); 0,105 Q4 (2021)

Abenojar, J., del Real-Romero, J.C., Martínez, M.A., Cano, M., Effect of silane treatment on SiC particles used as reinforcement in epoxy resins. The Journal of Adhesion. Vol. 85, nº. 6, pp. 287 - 301, 2009. [Online: May 2009] JCR: 0,688 (2009); 2,200 Q3 (2022) - SJR: 0,437 Q2 (2022)

Projects

Ph.D. Thesis

Developed:

Supervised:

In progress:

C. Hernando López de Toledo, Cryogenic Supply System with Magnetic Refrigeration Stage. Universidad Pontificia Comillas. Madrid (España).

Conference Papers

Books and Book Chapters