Biography:
Bachelor Degree in Industrial Technology Engineering at Universidad Politécnica de Madrid (2015), with her final thesis carried out at Eduardo Torroja Institute for Construction Sciences in Madrid (IETcc-CSIC). Master Degree in Materials Science and Engineering at Universidad Carlos III de Madrid (2018). She was hired as research support technician in Materials Science and Engineering and Chemical Engineering department at Universidad Carlos III de Madrid in 2015 until 2017. Then, she was a researcher with her work focused on recycling of composite materials. Nowadays, she is a PhD student at Pontifical University of Comillas in the Engineering Systems Modelling program. Her work is centred on the design and manufacturing of scaffolds by additive manufacturing.
Areas of interest:
Biomaterials, Composite materials, Nanocomposites, Carbon based materials, Additive manufacturing, Mechanical Characterisation.
Experience:
2014 - 2015 Research Assistant at Eduardo Torroja institute for construction science (CSIC).
2015 Research Assistant at ETSI Civil Engineering (UPM).
2015 - 2017 Research Assistant at materials science and engineering and chemical engineering department (UC3M).
2017 - 2019 Research Assistant and Lab Teacher at materials science and engineering and chemical engineering department (UC3M).
2019 - Present PhD student at Institute for Research in Technology (ICAI, Pontifical University of Comillas).
Skills:
Materials characterization.
Synthesis of materials.
Additive manufacturing.
Composite materials.
Nanotechnology.
Sol-gel coatings.
Adhesives technology.
Current research interests:
Development of scaffolds for bone regeneration by additive manufacturing reinforced with carbon-based nanomaterials.
Abenojar, J., López de Armentia, S., del Real-Romero, J.C., Martínez, M.A., Influence of the magnetization of thermally expandable particles on the thermal and debonding properties of bonding joints. Inorganics. Vol. 12, nº. 5, pp. 129-1 - 129-20, May 2024. [Online: April 2024] 
JCR: 2,900 Q2 (2022) - SJR: 0,453 Q2 (2022) Abenojar, J., López de Armentia, S., Barbosa, A.Q., Martínez, M.A., del Real-Romero, J.C., Da Silva, L.F.M., Velasco, F., Magnetic cork particles as reinforcement in an epoxy resin: effect of size and amount on thermal properties. Journal of Thermal Analysis and Calorimetry. Vol. 148, nº. 5, pp. 1981 - 1995, March 2023. [Online: December 2022]
JCR: 4,400 Q1 (2022) - SJR: 0,753 Q1 (2022) López de Armentia, S., Abenojar, J., Ballesteros, Y., del Real-Romero, J.C., Dunne, N., Paz, E., Polymerization kinetics of acrylic photopolymer loaded with graphene-based nanomaterials for additive manufacturing. Nanomaterials. Vol. 12, nº. 24, pp. 4498-1 - 4498-20, December 2022. [Online: December 2022]
JCR: 5,300 Q1 (2022); - SJR: 0,811 Q1 (2022);
JCR: 3,400 Q1 (2022); - SJR: 0,558 Q1 (2022); López de Armentia, S., Fernández-Villamarín, S., Ballesteros, Y., del Real-Romero, J.C., Dunne, N., Paz, E., 3D printing of a graphene-modified photopolymer using stereolithography for biomedical applications: a study of the polymerization reaction. International Journal of Bioprinting. Vol. 8, nº. 1, pp. 503-182 - 503-197, 2022. [Online: January 2022]
JCR: 8,400 (2022); - SJR: 0,821 (2022); Abenojar, J., Martínez, M.A., López de Armentia, S., Paz, E., del Real-Romero, J.C., Velasco, F., Mechanical properties and fire-resistance of composites with marble particles. Journal of Materials Research and Technology. Vol. 12, pp. 1403 - 1417, June 2021. [Online: March 2021]
JCR: 6,267 Q1 (2021); 6,400 Q1 (2022) - SJR: 0,964 Q1 (2021); 1,050 Q1 (2022) López de Armentia, S., del Real-Romero, J.C., Paz, E., Dunne, N., Advances in biodegradable 3D printed scaffolds with carbon-based nanomaterials for bone regeneration. Materials. Vol. 13, nº. 22, pp. 5083-1 - 5083-49, November 2020. [Online: November 2020]
JCR: 3,623 Q1 (2020); 3,400 Q2 (2022) - SJR: 0,682 Q2 (2020); 0,563 Q2 (2022)
JCR: 2,917 Q2 (2020); 2,200 Q3 (2022) - SJR: 0,738 Q1 (2020); 0,437 Q2 (2022)
JCR: 5,407 Q1 (2020); 6,300 Q1 (2022) - SJR: 1,630 Q1 (2020); 1,455 Q1 (2022)
JCR: 2,506 Q1 (2020); 3,400 Q1 (2022) - SJR: 0,631 Q1 (2020); 0,558 Q1 (2022) López de Armentia, S., Enciso, B., Mokry, G., Abenojar, J., Martínez, M.A., Novel application of a thermoplastic composite with improved matrix-fiber interface. Journal of Materials Research and Technology. Vol. 8, nº. 6, pp. 5536 - 5547, November 2019. [Online: September 2019]
JCR: 5,289 Q1 (2019); 6,400 Q1 (2022) - SJR: 0,898 Q1 (2019); 1,050 Q1 (2022) Martínez, M.A., Abenojar, J., López de Armentia, S., Environmentally friendly plasma activation of acrylonitrile-butadiene-styrene and polydimethylsiloxane surfaces to improve paint adhesion. Coatings. Vol. 8, nº. 12, pp. 428-1 - 428-13, December 2018. [Online: November 2018]
JCR: 2,330 Q2 (2018); 3,400 Q2 (2022) - SJR: 0,513 Q2 (2022) López de Armentia, S., Pantoja, M., Abenojar, J., Martínez, M.A., Development of silane-based coatings with zirconia nanoparticles combiningwetting, tribological, and aesthetical properties. Coatings. Vol. 8, nº. 10, pp. 368-1 - 368-14, October 2018. [Online: October 2018]
JCR: 2,330 Q2 (2018); 3,400 Q2 (2022) - SJR: 0,513 Q2 (2022) 
