Ir arriba
Información del artículo

Development of silane-based coatings with zirconia nanoparticles combiningwetting, tribological, and aesthetical properties

S. López de Armentia, M. Pantoja, J. Abenojar, M.A. Martínez

Coatings Vol. 8, nº. 10, pp. 368-1 - 368-14

Resumen:

Silane-based coatings with nanoparticles have been widely used in applications related to surface protection. Between them, the improvement of corrosion resistance by increasing the hydrophobicity is one of the main research goals. However, most coatings present problems of low wear resistance and poor aesthetic appearance. Therefore, the overall goal of this research is to manufacture hydrophobic sol-gel coatings based on silanes which comply with good tribological and aesthetical properties. In the present study, stainless steel plates were coated with a silane-based solution containing zirconia nanoparticles by dip coating. Water-ethanol solutions with silanes (methyltrimethoxysilane (MTS) and tetrathoxysilane (TEOS)) and different percentages of ZrO2 nanoparticles were prepared. Gloss, color, contact angle, surface energy, wear resistance, and thickness of coating were analyzed to elucidate the effect of zirconium oxide on the performance of the coatings. Results demonstrate that the ZrO2-silane coatings on stainless steel offer a balanced combination of properties: low wettability, high wear resistance, and similar color and brightness compared to pristine stainless steel.


Palabras Clave: sol-gel; silanes; ZrO2; wear resistance; gloss; color


Índice de impacto JCR y cuartil WoS: 2,330 - Q2 (2018); 2,900 - Q2 (2023)

Referencia DOI: DOI icon https://doi.org/10.3390/coatings8100368

Publicado en papel: Octubre 2018.

Publicado on-line: Octubre 2018.



Cita:
S. López de Armentia, M. Pantoja, J. Abenojar, M.A. Martínez, Development of silane-based coatings with zirconia nanoparticles combiningwetting, tribological, and aesthetical properties. Coatings. Vol. 8, nº. 10, pp. 368-1 - 368-14, Octubre 2018. [Online: Octubre 2018]


    Líneas de investigación:
  • Materiales compuestos y adhesivos