Ir arriba
Informacion del artículo en conferencia

ISO Tolerance specification in reverse engineering

M. Sáenz, R. Lorente-Pedreille

Since the publication of the ISO 14253-1 in 2013 [1]. we have worked in the development of a reliable measurement procedure in reverse engineering. In the beginning, it may seem to be easy to measure a part and to get the estimated value of the sizes and its uncertainties, but several times the dimensional tolerance is not considered, and geometrical tolerances are passed over (unattended). We propose here a tested procedure, simple and practical for the Industry, in accordance with the requirements of the ISO 14253-1:2013 for fully define the sizes and tolerances of any workpiece in reverse engineering.


Keywords: reverse engineeringtolerance assignmentfunctional characteristic

DOI: DOI icon 10.1016/j.promfg.2017.09.063    

Publicado: junio 2017.


    Líneas de investigación:
  • *Sistemas Mecánicos: Mecánica Estructural, Elementos de Máquinas, Prototipado Rápido, Metrología Dimensional

IIT-17-160A

Aviso legal  |  Política de cookies |  Política de Privacidad

© Universidad Pontificia Comillas, Escuela Técnica Superior de Ingeniería - ICAI, Instituto de Investigación Tecnológica

Calle de Santa Cruz de Marcenado, 26 - 28015 Madrid, España - Tel: (+34) 91 5422 800