Ir arriba
Información del artículo

Dual-frequency printed dipole loaded with split ring resonators

F.J. Herraiz-Martínez, L.E. García-Muñoz, D. González-Ovejero, V. González-Posadas, D. Segovia-Vargas

A novel approach to design dual-frequency printed dipoles is presented. This approach is based on an antipodal printed dipole loaded with split ring resonators (SRRs). This technique allows the choice of any pair of working frequencies. Two prototypes, the first one working at 1.32 and 2.83 GHz and the second one working at 1.2 and 2.05 GHz, have been manufactured and measured. The experimental results show reasonable values for the efficiency at both working frequencies. Moreover, the obtained radiation pattern is dipolar at both frequencies with low cross polarization levels.


Palabras clave: Metamaterials, microstrip antennas, multifrequency antennas, split ring resonators (SRRs).


IEEE Antennas and Wireless Propagation Letters. Volumen: 8 Páginas: 137-140

Índice de impacto JCR y cuartil Scopus: 1.300 (2009); 3.448 - Q1 (2017).

Referencia DOI: DOI icon 10.1109/LAWP.2009.2012402    

Publicado en papel: Enero 2009.



Cita:
F.J. Herraiz-Martínez, L.E. García-Muñoz, D. González-Ovejero, V. González-Posadas, D. Segovia-Vargas. Dual-frequency printed dipole loaded with split ring resonators. IEEE Antennas and Wireless Propagation Letters. vol. 8, pp. 137-140, Enero 2009.


    Líneas de investigación:
  • *Automatización y Comunicaciones Industriales
  • *Instrumentación Electrónica

pdf  Previsualizar
pdf Solicitar el artículo completo a los autores



Aviso legal  |  Política de cookies |  Política de Privacidad

© Universidad Pontificia Comillas, Escuela Técnica Superior de Ingeniería - ICAI, Instituto de Investigación Tecnológica

Calle de Santa Cruz de Marcenado, 26 - 28015 Madrid, España - Tel: (+34) 91 5422 800