IEEE International Workshop on Emergent Technologies for Instrumentation and Measurement Committee, Como (Italia). 10-11 junio 1996
Resumen:
In the following work we will present the design of a measurement system to be applied on a race-class bicycle, utilized to obtain an exact image of stress distribution along the frame, in order to optimize tube design. Due to the very low weight of the structure under test, the instrumentation set need to be designed so that its weight would not too much perturbate the mass distribution on the frame. Selection of utilized sensors and electronic interface design is discussed, and various examples of measured data are
showed.
Fecha de publicación: junio 1996.
Cita:
Chichi, F., Giannetti, R., Erzegovesi, P., On the road ''stress measurement system for race-class bycicle frames", IEEE International Workshop on Emergent Technologies for Instrumentation and Measurement Committee, Como (Italia). 10-11 junio 1996.
IIT-96-048A
Debido a las restricciones de copyright existentes, no se puede distribuir este material vía web. Sin embargo, mediante este formulario puede contactar con los autores. Ellos podrán distribuir un número limitado de copias del mismo por correo electrónico. Por favor, comprueba tu carpeta de correo no deseado.
Aviso legal | Política de cookies | Política de Privacidad
Calle de Santa Cruz de Marcenado, 26 - 28015 Madrid, España - Tel: (+34) 91 542 28 00
Utilizamos cookies propias y de terceros para darle funcionalidad a nuestro sitio y mejorar
nuestros servicios, mediante el análisis de sus hábitos de navegación. Acepto las "cookies" de este sitio.
|
|