Ir arriba
Informacion del artículo en conferencia

Representative contingency identification using data mining

L. Sigrist, I. Egido, E.F. Sánchez-Úbeda, L. Rouco

This paper studies the damping of electromechanical oscillations making use of both the ratio and phase modulation capabilities of static synchronous series sources. The design of the static synchronous series source damping controllers is addressed using eigenvalue sensitivities. The eigenvalue sensitivity with respect to a parameter of a feedback controller estimates the eigenvalue shift when such parameter is changed. The controller design comprises two steps: the design of the phase compensation network and the calculation of the controller gain. A combined method is developed to take advantage of both ratio and phase modulating capabilities of static synchronous series sources. Once the phase controller has been designed and incorporated into the system model, the ratio controller has to be designed taking into account the effect of the phase controller due to the direct relationship between the input of the ratio controller and the phase itself. The suggested approach is illustrated in a simple test system.


Palabras clave: Flexible AC Transmission Systems, Static synchronous series sources, Small Signal Stability, Eigenvalue Sensitivities, Controller design

2008 IEEE 25th Convention of Electrical and Electronics Engineers, Eilat (Israel). 03-05 Diciembre 2008

Fecha de publicación: diciembre 2008.



Cita:
L. Sigrist, I. Egido, E.F. Sánchez-Úbeda, L. Rouco, Representative contingency identification using data mining, 2008 IEEE 25th Convention of Electrical and Electronics Engineers. ISBN: 978-1-4244-2481-8, pp. 792-796, Eilat, Israel, 03-05 Diciembre 2008


    Líneas de investigación:
  • *Estabilidad: estabilidad de gran perturbación, ajuste de protecciones de deslastre de cargas por frecuencia, control de la excitación, estabilidad de pequeña perturbación, ajuste de estabilizadores del sistema de potencia, identificación de modelos de reguladores
  • *Predicción y Análisis de Datos

IIT-09-008A

pdf Solicitar el artículo completo a los autores



Aviso legal  |  Política de cookies |  Política de Privacidad

© Universidad Pontificia Comillas, Escuela Técnica Superior de Ingeniería - ICAI, Instituto de Investigación Tecnológica

Calle de Santa Cruz de Marcenado, 26 - 28015 Madrid, España - Tel: (+34) 91 5422 800